5 Things You Must Know When You Want To Make A New Electric Installation

Nowadays electricity it is very important, but there are still many electricity users who are still unfamiliar with things that should be considered. Electric current cannot be considered trivial. It is not only about the stun input, but the path to the output. In other words, you need to identify in more detail the material specs, cable conductivity, and the effect of currents on weather changes. Ask the licensed electrician Columbia SC if you want to know a lot about electrical installations in homes or buildings.

Check out the 5 things you must pay attention to when creating a new electricity network.

1. Stop contact
Note the ideal distance of the stop outlet from the floor is between 1-2 meters. Be sure not to overload, an ideal outlet can be branched with one T-plug for up to 4 branches.

2. Cable
Do not just buy a cable, adjust the power delivered. Copper and PVC insulated electrical cables that are permanently installed in your house must be at least 2.5mm2 in size, regardless of the amount of electrical power installed and the only 10A of maximum electricity can be supplied. Use a 4mm2 cable if the electric current is between 10A – 16A.

3. Grounding
Grounding or grounding in electrical installations is as a precaution against contact between living things and electrical voltage that is exposed due to the failure of insulation. Grounding in your home is installed with two types, namely for electrical installations and lightning rod installation. The two grounding systems have to be installed separately and at least 10m apart. The grounding connection for home electrical installations is installed in kWh meters.

4. Rain and Leaks
Should not do repairs when heavy rain or roof leaks occur, it is closely related to water as a conductor of electricity, so there is often a short-circuit or short-circuit. Also do not make improvements to electrical installations when lightning and lightning flashes.

5. Periodic Checks
Perform periodic electrical installation checks by using the services of a trusted officer or bureau. If there are problems with the installation in the future, you can contact them again to make repairs, or make additions to the existing installation.

Leave a Reply

Your email address will not be published. Required fields are marked *